OPTIONAL – REMOVING THE COVERCOAT:

Start at the outside edge of the covercoat and use a razor or your fingernail to get under the covercoat. Slowly lift the covercoat and peel it off the ware.  Wipe the surface clean with a damp cloth or sponge.

OPTIONAL – HEAT CURING:

If you desire, you can further cure the decal on the ware by heating it in an oven to 320 degrees Fahrenheit (160 degrees C) for 20 to 25 minutes.  Be careful not to exceed 320 degrees Fahrenheit or 160 degrees C.

See Instructions on TOP of page: INSTRUCTIONS FOR COLD APPLICATION/LOW TEMPERATURE DECALS

 OPTIONAL – REMOVING THE COVERCOAT:

Start at the outside edge of the covercoat and use a razor or your fingernail to get under the covercoat. Slowly lift the covercoat and peel it off the ware.  Wipe the surface clean with a damp cloth or sponge.

OPTIONAL – HEAT CURING:

If you desire, you can further cure the decal on the ware by heating it in an oven to 320 degrees Fahrenheit (160 degrees C) for 20 to 25 minutes.  Be careful not to exceed 320 degrees Fahrenheit or 160 degrees C.

12301 INTRALINE COLD DECAL (7 in. x 7½ in.)

  OPTIONAL – REMOVING THE COVERCOAT:

Start at the outside edge of the covercoat and use a razor or your fingernail to get under the covercoat. Slowly lift the covercoat and peel it off the ware.  Wipe the surface clean with a damp cloth or sponge.

OPTIONAL – HEAT CURING:

If you desire, you can further cure the decal on the ware by heating it in an oven to 320 degrees Fahrenheit (160 degrees C) for 20 to 25 minutes.  Be careful not to exceed 320 degrees Fahrenheit or 160 degrees C.